Watchguard 4RE, Руководство пользователя

Страница: 71 / 118

Entering Covert mode
Important! Avoid using the Power control to power ON and OFF the 4RE. You
can damage or lose data doing this. We recommend that you use the vehicle
ignition to power on and off. See Powering off your vehicle on
page 35 .
Entering Covert mode
See Using Covert mode on page 27
Menu control
Menu , on the control panel, provides access to the WatchGuard 4RE tasks window. This closes
the live camera feed.
Tip: Although not showing on the display screen, the cameras are still recording.
Pressing the Menu control exits most screens and returns you to the Live View screen.
See Main Menu screen on page 43 .
Record control
You can start a recorded event using the Record control, but an event is typically
started by auto-triggers.
If the 4RE DVR is powered on, it is continuously recording video to the hard drive. When
you start a recording and then press the
Stop control, the 4RE DVR protects the video
and audio segment between the two button presses as a Recorded Event . 4RE
continues to record after you press the Stop control.
Only recorded events are uploaded to your Evidence Library.
Note: The 4RE DVR can also be set up to start recorded events automatically
(page 81) . These automatic triggers are configured in your Evidence Library.
Recording to the video loop and recorded events
The 4RE DVR captures video all the time in a video loop. The video segment between pressing
the
Record control and the Stop control is a recorded event. No other recordings are saved
unless you Record After the Fact (RATF).
Note: If the 4RE DVR is configured to enable pre-event video, a recorded event
also includes that pre-event time.
4RE In-Car Video User Guide 4.0.6
WGD00089 Revision D 71