Watchguard 4RE, Руководство пользователя

Страница: 28 / 118

Using In-Car 4RE DVR
3. Press Stop on the control panel to stop recording.
Note: Covert mode differs from Dark mode. Dark mode temporarily dims the
system display and turns off the LEDs.
For more information, see Dark Mode on page 77 .
Using Covert mode in a recording group
4RE shares with all members of a recording group that it is entering or exiting Covert Mode .
The VISTA WiFi camera can choose to follow this state. For more information about covert
mode with VISTA, see the VISTA Wearable Camera User Guide.
Creating a recorded event using Record-After-the-Fact
®
(RATF)
The 4RE DVR is always recording. An RATF event is typically video that was not initially included
as part of a recorded event.
You may want to make a recorded event of a recording that is not part of a recorded event. If
the video resides on the hard drive, you can retrieve it and make an
RATF event.
You can also use RATF to make a video if an event description was removed from the DVR. If the
video is still there, you can recreate that event.
Creating an RATF event
To create an RATF event:
1. Press Menu on the control panel and touch the Record After The Fact button on the screen.
The Record After the Fact screen appears.
2. Set the start and end date/time for the event you want to create.
a. Touch the field you want to change.
b. Use the up and down arrows to change the numbers in the highlighted field.
28 4RE In-Car Video User Guide 4.0.6
WGD00089 Revision D