Watchguard 4RE, Руководство пользователя

Страница: 25 / 118

Recording group
2. Press Stop to stop a recording.
The 4RE DVR protects the video and audio segment between start and stop as a
recorded event.
Note: If the 4RE DVR is configured to enable pre-event and/or post-event video
(page 72) , a recorded event also includes those times.
Recording group
If you are using VISTA WiFi cameras, a recording can be started by any VISTA WiFi camera or
the 4RE system. If a VISTA WiFi camera starts an event, 4RE can choose to start an event also.
This creates a group that collaborates on the recording of a single incident by multiple officers.
For more information . . .
See your Evidence Library software documentation.
See Associating 4RE with a recording group on page 39
Starting and stopping a recorded event
When you press Record on the control panel, the 4RE DVR begins a recorded event. Most
recorded events are started by the auto-start settings (triggers) (page 81) . The 4RE DVR
sends the status to members of a multi-peer recording group. 4RE DVR marks the segment
between pressing the
Record control and pressing the Stop control as protected. You can stop
the recorded event by pushing the Stop control.
Important! If the 4RE DVR is powered on, it is continuously recording to the
hard drive. Pressing Stop does not stop this continuous recording—it only marks
the end of the protected recorded event.
For more information . . .
See Creating recorded events on page 24
See Tagging a recorded event on page 25
See Associating 4RE with a recording group on page 39
Tagging a recorded event
After you press Stop for an event 4RE then asks you to tag the event, depending on your 4RE
configuration. Tagging associates each recorded event with a category. The event tags can
make the event easier to find when searching the Evidence Library software and can affect
retention of the event. The category you tag the event with determines the quality of the video
from the front camera.
Event categories and other event tag questions are determined by your agency and configured
in your Evidence Library software. For more information on configuring the 4RE DVR, see your
Evidence Library software documentation.
4RE In-Car Video User Guide 4.0.6
WGD00089 Revision D 25