![WATANABE WPMZ-1 Скачать руководство пользователя страница 53](http://html1.mh-extra.com/html/watanabe/wpmz-1/wpmz-1_instruction-manual_3499830053.webp)
Graphical Digital Panel Meter WPMZ-1 INSTRUCTION MANUAL
52
IM-0882-03
12.
SHORTCUT
OVERVIEW
The shortcut function allows you to control the external control function and “CompareList” function by key
operation. You can regist external control functions in the each upper, lower, left, and right keys.
Please set it when calibration work is used frequently.
Register the function on the shortcut registration screen and execute the function by pressing and holding the
corresponding cross key for 1 second on the measurement screen.
How to regist
Register the shortcut function by the following procedure.
How to execute
The relationship between function execution operation and terminal control is as shown in the table below.
*The function to perform trigger operation is "DispHold (When DispHoldMode is “OneShot”)",
"MonitorChange", "TrendLog".
*“PatternChange” operates continuously switching when continuing long press.
There are three operation methods of external control function, terminal control, shortcut, and communication
function, but there are the relationships shown in the table below as the operation at the time of simultaneous
execution.
(Measurement Display)
Moves to shortcut register
display by FUNC key
Moves to external control select
display by right arrow key
Select the function by
up/down arrow keys
Resisters the function by
ENTER key
Return to shortcut register
display by left arrow key
Stores registration
parameters and returns
the measurement display
by FUNC key
(Completion of
registration)
Terminal control
Shortcut
ON/OFF
operation
ON: Short with COM terminal (or input
“Low”)
OFF: Open the terminal (or input “High”)
ON: Press and hold the key for 1sec
OFF: Press and hold again the key for
1sec
Trigger
Operation(*)
The function is executed at each falling edge
when shorting with the COM terminal. (or
input “Low”)
The function is executed at each pressing
and holding the key for 1sec.
Regist shortcut function
Execute the function
*Shortcut Register display will open when push FUNC key at
measurement screen.