Printer Overview
Feed / Pause
button
WPL308 Quick Start Guide
LED indicator
Power jack
socket
Fan-fold paper
entrance chute
USB host
Centronics
interface
Loading the Ribbon
Top cover
Power
RS-232C
Ethernet
Micro SD
USB
open lever
switch
interface
interface
card socket
interface
Note: The interface picture here is for reference only. Please refer to the product specification for the interfaces
availability.
Ribbon access
cover
Ribbon
rewind hub
Ribbon
rewind gear
Top cover
Ribbon
supply hub
Print head
Gap sensor
(receiver)
Media cover
Gap sensor
(transmitter)
Media holder
Media holder
locking switch
Media guide
adjustment button
Black mark
sensor
Platen roller
Media guides
Page 1 of 2
(1) Open the printer’s top cover by
pulling the top cover open levers
located on each side of the printer
and lifting the top cover to the
maximum open angle.
(2) Open the ribbon access cover and
the media cover.
(3) Insert the ribbon spindle into the
ribbon core.
(4) Install the ribbon right side onto the
supply hub first then align the
notches on the left side and mount
onto the spokes.
Note: The yellow part of spindle is in
left side.
(5) Insert the rewind spindle into the
paper core.
(6) Install the paper core right side
onto the rewind hub first then
align the notches on the left side
and mount onto the spokes.
Note: The yellow part of spindle is
in left side.
* Loading Path for Ribbon
(7) Stick the ribbon onto the ribbon
rewind paper core.
(8) Turn the ribbon rewind gear until
the ribbon plastic leader is
thoroughly wound. Close the ribbon
access cover and the top cover.
