Wasp wdt60, Руководство пользователя

Страница: 43 / 142

USE AND FUNCTIONING
35
4
4.5 STATUS INDICATORS
4.5.1 LED Status
The WDT60 provides three different LEDs signaling the PDA status.
LED STATUS
Good Read
(right side)
Red
Scanning LED is ON from the time the
user hits the scan button or side trigger
buttons until the bar code is decoded.
Green
Scanning LED is ON, showing a good
decode.
Charging Status
(left side)
Green
It is constant once the charging process
has been completed (full charge).
Red It is constant while charging.
Red blinking
In case of charge fault it is constant for
two hours, then it starts blinking.
Amber
It is constant when charging a severely
discharged main battery until the battery
has sufficient charge for its controller to
begin communicating with the WDT60's
power system. Once the battery is
communicating, the charge LED will
switch to glow red and continue charging
normally.
Keyboard Status
(center)
Off Keyboard in primary.
Yellow solid Yellow alternate key mode.
Blue solid Blue alternate key mode
Sky blue solid CapsLock enabled.