manualshive.com logo in svg

WÄRTSILÄ ELAC LAZ 5200, Руководство по эксплуатации, Страница: 99 / 136

Поделиться
Скачать
WÄRTSILÄ ELAC LAZ 5200 Скачать руководство пользователя страница 99

R

efer to pr

otection

 notice ISO 16016

TH 52 614 8001 EN Rev. A 09/2018

Wärtsilä ELAC Nautik GmbH 

97 / 134

ELAC LAZ 5200 –  Operating Instructions

Operation

6.5.11.5

Configuration of the Serial Interfaces

The 

Navigation Echo Sounder ELAC LAZ 5200

 has four serial interfaces via which alarm 

information, depth information and information on the device status can be transmitted. 
Various NMEA data sets are available for transmission of the information.

The data sets that can be transmitted via the interface can be defined individually for each 
interface in the "SERIAL INTERFACES" menu.

The following NMEA data sets are available:

All serial interfaces function in the same way.

The pin assignment of the interfaces on the 

Navigation Echo Sounder ELAC LAZ 5200

 

can be found in the connection plan (

9.1 "Applicable Documents").

Designation

Description

ALC

Standard NMEA data set for ensuring a 
secure and consistent data distribution.

ALF

Standard NMEA data set for signalling the 
alarm status.

ALR

Standard NMEA data set for signalling the 
alarm status.

DPT

Standard NMEA data set, contains the 
water depth in metres.

DBT

Standard NMEA data set, contains the 
depth under the transducer in fathoms, 
metres and feet.

HBT

Standard NMEA data set, contains infor-
mation on the device status.

PELACSDS

Proprietary NMEA data set, contains in-
formation on the set parameters and the 
installation position of the transducer in 
addition to the water depth.

Tab. 6.22: NMEA Data Sets

The BAM-compliant sets ALC and ALF should be used instead of ALR. ALR is con-
tained only for reasons of compatibility with older environments.

Further information on the NMEA data sets can be found in section 

9.3 "Description 

of the NMEA Data Sets".

The default setting for the Baud rate for all serial interfaces is "4800".

Содержание ELAC LAZ 5200









































































































































Отзывы:

Нет отзывов