manualshive.com logo in svg

WÄRTSILÄ ELAC LAZ 5200, Руководство по эксплуатации, Страница: 98 / 136

Поделиться
Скачать
WÄRTSILÄ ELAC LAZ 5200 Скачать руководство пользователя страница 98

ELAC LAZ 5200 – Operating Instructions

Operation

96 / 134

Wärtsilä ELAC Nautik GmbH 

TH 52 614 8001 EN Rev. A 09/2018

R

efer to pr

otection

 notice ISO 16016

6.5.11.4.3 Selection of the User-Defined Transmission Groups for the Input

Precondition:

The "NETWORK" menu is unlocked 

6.36.

The default setting for all user-defined Transmission Groups is "Off".

Proceed as follows to select the user-de-
fined transmission groups:

1. Navigate to the menu 

MAIN MENU > 

NETWORK > TX GROUPS > USER 
GROUPS

.

2. Select the desired menu item 

 and 

press the 

[ENTER]

 key.

3. Select the setting “On” with the 

[CUR-

SOR]

 keys (up or down).

4. Press the 

[ENTER]

 key to confirm the 

selection.

5. Repeat steps 2 to 4 to select further 

user-defined transmission groups.

6. Reboot the device 

6.5.3.

Fig. 6.68: Selecting User Groups

Содержание ELAC LAZ 5200









































































































































Отзывы:

Нет отзывов