background image

WARN INDUSTRIES

PAGE 1

83688A0

©2009 Warn Industries, Inc.

WARN® and the WARN logo are trademarks of Warn Industries Inc.

INJURY HAZARD

Failure to observe these instructions could lead to severe injury or death.

INSTALLATION INSTRUCTIONS

SKID PLATE BODY ARMOR

Part Number:

 

83680

Application:

 

2009 POLARIS SPORTSMAN XP 550/850

 

WARNING

‰

Alw

Alw

Alw

Alw

Alwaaaaays 

ys 

ys 

ys 

ys Read all warning labels before operating.

‰

Alw

Alw

Alw

Alw

Alwaaaaays 

ys 

ys 

ys 

ys use extreme caution when drilling on any vehicle. Make sure that all fuel lines, brake lines,

electrical wires, and other objects are not punctured or damaged when/if drilling on the vehicle.
Thoroughly inspect the area to be drilled (on both sides of material) prior to drilling, and relocate any
objects that may be damaged. Failure to inspect the area to be drilled may result in vehicle damage,
electrical shock, fire or personal injury.

‰

Alw

Alw

Alw

Alw

Alwaaaaays 

ys 

ys 

ys 

ys wear safety glasses when installing this kit. A drilling operation will cause flying metal

debris.

‰

Alw

Alw

Alw

Alw

Alwaaaaays 

ys 

ys 

ys 

ys use extreme caution when cutting and trimming during fitting.

‰

Alw

Alw

Alw

Alw

Alwaaaaays 

ys 

ys 

ys 

ys remove jewelry and wear eye protection.

‰

Ne

Ne

Ne

Ne

Nevvvvver 

er 

er 

er 

er lean over battery while making connections.

‰

Alw

Alw

Alw

Alw

Alwaaaaays 

ys 

ys 

ys 

ys insure components will remain secure during installation and operation.

‰

Alw

Alw

Alw

Alw

Alwaaaaays 

ys 

ys 

ys 

ys tighten all nuts and bolts securely, per the installation instructions.

‰

Alw

Alw

Alw

Alw

Alwaaaaays 

ys 

ys 

ys 

ys inspect, tighten, and replace damaged hardware before use.

‰

Alw

Alw

Alw

Alw

Alwaaaaays 

ys 

ys 

ys 

ys replace all worn or damaged parts before operating.

‰

Ne

Ne

Ne

Ne

Nevvvvver 

er 

er 

er 

er operate this WARN product with damaged or missing parts.

‰

Ne

Ne

Ne

Ne

Nevvvvver 

er 

er 

er 

er work under vehicle before properly securing vehicle.

Your safety, and the safety of others, is very important.  To help you make informed decisions about
safety, we have provided installation and operating instructions and other information on labels and in
this guide. This information alerts you to potential hazards that could hurt you or others. It is not
possible to warn you about all potential hazards associated with this product, you must use your own
good judgment.

CARELESS INSTALLATION AND OPERATION CAN RESULT IN SERIOUS INJURY OR EQUIPMENT
DAMAGE. READ AND UNDERSTAND ALL SAFETY PRECAUTIONS AND OPERATING
INSTRUCTIONS BEFORE INSTALLING AND OPERATING THIS PRODUCT.

This guide identifies potential hazards and has important safety messages that help you and others avoid
personal injury or death

.  WARNING 

and 

CAUTION 

are signal words that identify the level of hazard.

These signal words mean:

WARNING signals a hazard that could  cause serious injury or death, if you do not follow

recommendations.   CAUTION signals a hazard that may cause minor to moderate injury, if you
do not follow recommendations.

This guide uses 

NOTICE 

to call attention to important mechanical information, and 

Note

: to emphasize

general information worthy of special attention.

NOTICE

Product may affect airflow to vehicle engine and drivetrain components.

Installation of this accessory may affect vehicle warranty.

This product will NOT protect vehicle from all impacts and terrain conditions.

Содержание 83680









Отзывы: