Press then or to select required plan, then press followed by
And then view the set-points by using or When finished press 4
times.
Dataterm IHC User Guide
How to load a plan
Viewing time and temperature settings
Hot Water
Setting the Clock
See What’s Happening:
Creating a personal plan:
What is Dataterm IHC?
How does it Work?
What Next?
Dataterm IHC is an intelligent heating control. It has advanced abilities which a
simple programmer and room thermostat cannot offer. It uses fuel economically
and is dedicated to your comfort.
Dataterm IHC does the thinking for you, it has 30 inbuilt heating plans and the
facility for 3 individual custom plans. Simply choose one to suit your requirements
and your heating and hot water will be run efficiently for as long as you wish.
Using any one of the 3 custom plans Dataterm IHC will give you exactly the
temperature at the time required, with up to 8 set-points per day. This should cater
for the most demanding life styles.
On the next page you will see how easy it is to put Dataterm IHC to work. The
built-in clock is already accurately set and needs adjusting only twice a year for
summer / winter time. Apart from that all you need do is choose a plan to suit
your needs and get it working.
The Display Screen and Keys.
Personal Plans 1,2 & 3 are for you to create. Simply follow the
instructions below and enter the times and temperatures you require.
o
o
CH. off 21 C 21 C
HW. off Fri 18:37
Use this key to temporarily raise the
temperature and turn the heat on.
The tap key is used to boost hot water
and to move across the screen.
Use this key to temporarily lower the
temperature and turn the heat off.
The Plus, Minus and Tap keys shown above also act as Up, Down and Right arrows, these are
displayed on the screen when editing or setting plans and options. The position of the cursor is
shown on the screen in the way of a flashing oblong.
Press Once
Use or to find
a plan from 1 to 33
Use to set the plan
Use to confirm this
Done
Done
1
5
Summer and Winter Time.
Press Twice
Press or
to change the hour
Use for minutes
& days
Press to return
to normal display
2
3
4
6
Press Once
Press or to reach personal plans 1,2 or 3
Press to confirm your choice
Press and then to begin editing
Begin Editing. #1 is the first of mondays 8 set-points.
Press & or to set chosen temperature
Press & or to fix set-point hour
Press & or to fix minutes (5 minute increments)
Press & or to progress through the 8 set-points
If your set-points for Monday are the same for all days of the week then press until you see
this display, then press the plan is now copied and all that remains is to program
the hot water or continue as above to enter the individual daily set-points.
Pressing will run through all of the days, when you reach
“HW#1”
Stop This
is set-point #1 for the hot water. Press once followed by once, this will
give an “ON” press again for an “OFF” Press followed by to set hour
press again to set minute followed by again then to set HW#2 and so
on until you have finished.
Press once followed by twice =
Setting a plan
Rev: A / Jan 2001 / GB
2
Use or
Set
Edit
2
2
2
2
2
2
2
2
Personal Plan 1
2
Use or
Set
Edit
2
