12
warmhaus.com
2.1.6. Shutting off the Boiler
To set the boiler to OFF position while it is in SUMMER
position;
To set the boiler to
OFF
mode while it is in
WINTER
;
Press and hold
MODE
button and
release the button after cycle on
the screen
is completed,
will be displayed on the
screen, backlight is turned OFF,
now the boiler is in OFF mode.
Press and hold
MODE
button and
release the button after cycle on
the screen
is completed,
boiler will switch to
SUMMER
mode.
Then, when the same
transaction is repeated, after
cycle is completed
will be
displayed on backlight is turned
OFF boiler is now at
STANDBY
position.
2.2. USE WITH ROOM THERMOSTAT
(OPTIONAL)
This product can be used together with a room
thermostat which can be purchased separately as an
accessory. All Warmhaus thermostats can be connected
with dual-wired cables. Carefully read user’s and
installation instructions given in the Accessory set. When
connected to a room thermostat, the appliance can be
operated based on requested room temperature. With
certain models of control units, you may run your boiler
on a daily / weekly programme.
General Utilisation Type
• Please consult our authorised services for room
thermostats compatible with Warmhaus boilers.
• Do not remove device components during operation.
• Do not place the boiler in a position allowing direct
sunlight exposure or near heat sources.
• Manufacturer company shall not be responsible for
below given situations:
a) Faulty installation
b) Making intervention on the device by unauthorised
persons
c) Failing to follow instructions given in this book and
room thermostat booklets
Room thermostat should be installed at 1,50 m
height from ground.
At least 30 cm distance should be available
from doors and windows open for air
circulation.
Installation instruction:
Device installation shall only be
performed by the Warmhaus Authorised Service. The
dual cable required for installation is supplied by the
dealer/consumer.
Figure 3
Thermostat position
150 cm
Min.
30 cm
Maintenance and Service Life:
Warmhaus room
thermostat should not come into contact with water or
excessive humidity. Unless an external damage occurs,
the room thermostat does not require any maintenance.
2.3. USE OF OUTSIDE TEMPERATURE
SENSOR (OPTIONAL)
This product can be used together with a weather
compensation kit which can be purchased separately as
an accessory.
When connected to a weather compensation kit, the
appliance runs with reference to the weater temperature,
based on selected heating curve. Available heating curves
are given in figure 5.
