11
warmhaus.com
2.1.5. Operation in Summer Mode
Boiler only operates for heating the domestic hot water in
this mode. In order to switch to summer mode;
Domestic Hot Water Adjustment
at Winter
Position; You can adjust
the hot tap water temperature
value between 35 –60 °C with (6)
and (7) numbered buttons under
the RESET button. LCD screen
backlight is turned ON during
temperature change, °C and
symbol flashes besides the DHW
temperature value. LCD screen
backlight is turned OFF after
adjustment.
In this mode you can adjust the
Domestic Hot Water temperature
between 35 – 60 °C with (7)
and (8)
numbered buttons.
2.1.4. Operation in Winter Mode
In winter mode, boiler operates both for heating the
environment and providing Domestic Hot Water.
Radiator (CH) temperature adjustment is made with
(3) and (4) numbered buttons in Figure 1 Domestic Hot
Water temperature adjustment is made with (6) and (7)
numbered buttons and this temperature is indicated with
(9) numbered indicator for Radiator (CH) and with (11)
numbered indicator for Domestic Hot Water.
In such case, combi boiler initially
gets into Radiator position, its
symbol
flashes on the left
bottom corner of screen and
tap symbol
is seen at right
bottom corner. A digital manometer indicating the system
pressure is located at lower middle section of the screen
and also existing radiator system temperature is seen on
the screen at the same time and screen light is turned off.
When boiler is started, flame modulation symbol is seen
at the middle section of the screen. At that position, you
can increase
and decrease
the temperature
with CH temperature adjustment buttons (see. Figure
1) (3) between 35 – 80 °C, screen lights when buttons
are pressed and °C symbol
flashes besides the CH
temperature value.
If you are starting the combi for
the first time hold
MODE
button,
and release the button after the
cycle
is completed on the
screen, initially boiler switches
to radiator position, its symbol
will flash on left top corner
of the screen existing radiator
installation temperature and
screen light will turn off.
In order to summer mode hold
MODE
button and release the
button after completion of cycle
on the screen. At that position,
symbol
flashes at right
bottom corner of the screen and
existing tap water temperature
will be seen on the screen and
LCD screen backlight is turned
OFF.
If you have a floor heating system, as our
Authorised Service adjust your boiler for
“Low Temperature Operation”
, maximum
temperature shall be limited with the
Radiator (CH) temperature adjustment button (3) (e.g.
maximum 47 °C).
When the boiler is started for
the first time, screen displays
nG letter and then a number
(for instance 25) indicating kW
power of the device.
Then, OFF letter is displayed,
and LCD screen backlight is
turned OFF. Now, boiler is at
STANDBY position.
LCD screen backlight is turned ON during temperature
change, °C symbol flashes besides the DHW temperature
value. Adjustment value is confirmed after backlight is
turned OFF following the adjustment.
