1
warema_2018151_alhb_en_v4•2021-01-01
We reserve the right to make technical modifications
General information
Fig. 1 WMS Wall-mounted transmitter plus
The WMS Wall-mounted transmitter plus is used for
remotely controlling WAREMA WMS receivers for awning,
roller shutter, external venetian blind, window and light
products.
Safety instructions
Intended use
This WMS Wall-mounted transmitter plus is an electronic
device developed to control WMS receivers. Any use other
than the purpose described in these instructions requires
approval from the manufacturer.
AUTION
C
The wall-mounted transmitter plus is for
indoor use only. It is not water-proof. Do
not leave the wall-mounted transmitter plus
outdoors!
AUTION
C
Never activate buttons on your WMS Wall-
mounted transmitter plus arbitrarily without
a line of sight to the sun shading system.
Children must not play with this product –
keep remote controls and transmitters out of
the reach of children!
You can find instruction videos on our
YouTube channel
at:
http://www.youtube.com/user/SonnenLichtManager/videos
Learn the WMS Wall-mounted transmitter plus into the
receiver (see also the WMS Practical handbook
art. no. 2031186).
Commissioning can also be carried out using the
WMS studio pro or homee PC software.
Installation
Fig. 2 Mounting structure for the WMS Wall-mounted transmitter
plus
WMS Wall-mounted transmitter plus (included in the
scope of delivery),
Central frame/plate (on-site or can be ordered as an
optional accessory),
Switch program frame (on-site or can be ordered as an
optional accessory),
Mounting frame (included in the scope of delivery).
Attach the mounting frame to the wall using the
countersunk head screws and screw anchors included.
Position the central frame/plate of the switch program
you require.
Clip on the wall-mounted transmitter.
Clipping the wall-mounted transmitter and central
frame/plate into the available snap-in latches will hold
them in place on the mounting frame.
Only use countersunk head screws so that the
screws are flush with the mounting frame and the
WMS Wall-mounted transmitter plus can be secure-
ly clipped on.
Operating and installation instructions
WMS Wall-mounted
transmitter plus
Valid from
1 January 2021
Keep for future use.