890557_d•en•01.07.2014
We reserve the right to carry out improvements
80
Wisotronic 1-channel
Operating instructions
7.3.2.1 Scene selection
Select scene 1 to 4 in this menu line.
Turn the touch wheel to select the desired scene (the scenes change when
turning and are displayed at the right in the menu line).
NOTE
The [
<<
] and [
>>
] buttons can also be used to change between the four
scenes.
7.3.2.2 Change scene name
In this menu line you change the scene name (also called “alias”) for the se-
lected scene.
With the touch wheel select the menu line [
Change scene name
].
The following view appears in the display:
You will see the current scene name in the white input field and the blinking
cursor at the right. The available characters are shown in the selection field
below it. The so-called “Alias name” of the scene may consist of upper case
letters, lower case letters, numbers and symbols.
You can change the alias names of a scene:
Turn the touch wheel to select a symbol from the lower frame.
Press the touch wheel to enter the selected symbol in the input field.
Push the function button [
] to delete a symbol in the input field (to the left
of the blinking cursor).
Press the touch button [
A/a/1
] to switch between upper and lower case or
numbers and special characters.
Enter the desired name in this manner and then push the [
Back
] function but-
ton.
This returns you to the window [
Manage scenes
].
NOTE
You can enter a maximum of 28 characters (2 lines of 14 characters each).
If there are more than 14 characters, the name is displayed in two parts. To
avoid a line break in the middle of a word, you can fill the end of the first line
with spaces, if necessary.
Channels, groups, scenes