WAREMA Wisotronic, Руководство по установке

Страница: 46 / 108

warema_890558_alhb_en_v5•2022-02-01 We reserve the right to carry out improvements
46
Wisotronic 1-channel
Installation instructions
8.1.3 Measured values start
menu
In this menu you can define which measured values are displayed in the
Start menu. You can select which sensors are to be evaluated.
The measured values of the weather station multisense are always displayed
in the Start menu. If you have not installed any other sensors, you can skip
this step.
This menu is also available to the user. It therefore can only be reached via
the openly accessible [
System
] menu.
Press the [
Sett.
] function button in the main menu and then go to the
[
System
] > [
Measured values start menu
].
The following menu is displayed:
Here you can assign the desired sensors to the four measured values that
appears in the Start menu. For each measured value, only the sensors that
are actually available are offered for selection.
Using the touch wheel, select a measured value and assign a sensor from
the displayed selection.
The [
Delete
] function button removes the currently assigned sensor and
[
---
] is displayed. This measured value no longer appears in the Start menu.
The [
Stand.
] function button resets the selection to the default assignment.
The [
Canc.
] function button is used to leave the selection menu without mak-
ing a change.
Press the [
Back
] button to return to the [System] menu.
Start menu
 Main menu
 Settings

System
 Measured values start menu
System settings