WAREMA Comfort Timer, Инструкция по эксплуатации и установке

Страница: 25 / 48

25
890202_b•en•16.11.2011 We reserve the right to carry out improvements
Train
In menus 7 to 10 you can now train up to four EWFS transmitters
on your WAREMA Comfort Timer.
Menus 07 to 10 Training transmitter 1
Press or hold the
[Menu]
button followed
by the button until menu 7 appears.
The three figure display flashing indicates
that the device is ready for training. With
a multi-channel transmitter, first select
the channel to which the WAREMA Com-
fort Timer is to respond. Then press the
learn button "L" on the transmitter. Once
the display has changed, the transmitter
has been detected. Save using the but-
ton. Other transmitters can be trained in
menus 8-10.
To delete a transmitter, open the transmitter you want to delete in
menus 7-10. Use the or buttons to set the display [---] and
save using the button.
Tip:
You can only operate the sun protection using the hand-
held transmitter displayed. If you want to delete a hand-held
transmitter, for example, you can check in advance which
menu the required hand-held transmitter is saved in, and
then delete it.
Note: The function keys A, B, C on the hand-held transmitter do
not have a function on the WAREMA Comfort Timer.
Note: The WAREMA range includes transmitters in an enclosure
for wall mounting. These wall-mounted transmitters have
exactly the same functions as the hand-held transmitters
described here and can be used as an alternative or in
addition.
Set
Menu