WAREMA Comfort Timer, Инструкция по эксплуатации и установке

Страница: 21 / 48

21
890202_b•en•16.11.2011 We reserve the right to carry out improvements
Note: The flashing symbols on the display are given below in
grey.
To change the settings, you need to change to setting mode; to
do this press the
[Menu]
:
Menu 01
The menu number is shown above the text
[Menu] , in the menu [ 01 ] example oppo-
site. The (previous menu) and (next
menu) buttons can be used to display the
menus in sequence.
When this button is pressed briefly:
The next or previous menu is displayed.
Pressing the button for longer than 1
second: The menu numbers are scrolled
through quickly.
Values that can be changed are always displayed flashing. You
can then change the value using the buttons or . If you want
to save your settings, press the button, and the set value will
stop flashing.
The buttons (previous menu) and (next menu) can then be
used to scroll through to the previous or the next menu, and the
next value that can be changed will flash. If you want to exit set-
ting mode again, press the
[Menu]
button.
The WAREMA Comfort Timer will then go back into display mode.
If there are no further inputs within three minutes, the WAREMA
Comfort Timer will automatically go back to display mode. If any
setting made has not been saved, this will be lost.
A list of menus can be found in the chapter "Appendix".
Set
Menu
Mo Tu We Th Fr Sa Su
Programming