Item #01920
Side Panel x2
#900467
Plastic Tray #900466
Ramp
#900520
LIVING ROOM SERIES
GUINEA PIG HOME
Roof Panel #900464
Bolts x8
and
Hex Wrench
#900473
Assembly
Instructions
Front Panel #900462
Back Panel #900463
Food Bowl
#900469
Shelf
#900474
Revised 11/7/2013
Wheels
x4 #900492
Attach Side Panel with 4 more
hex Bolts and tighten all.
Step 3
Attach the Roof Panel by sliding
the right rear lower wire extension
under the support tabs and into the
hole on the Side Panel.
Slide the rest of the lower wire
extension under the open tabs
and into the hole in the left
Side Panel.
Step 2
4 Hex Bolts
Step 1
Insert a non-locking Wheel
into the Right Side Panel so
the holes line up, then insert Bolt. Align the hole in the
bottom of the Back Panel with the hole in the Side
Panel that you just placed the Bolt through. Using the
Hex Wrench, screw in the bolt through the Side Panel
and into the Back Panel; repeat for the opposite Side
Panel making sure the tabs face towards the outside
and the tracks face towards the inside of the cage.
Attach the Front Panel in the same way, using the
locking Wheels and making sure the door opens out.
TIP: Do not tighten bolts fully until all panels are in
place.
Tracks
facing in
