War Wing Ultimate Combat Delta Скачать руководство пользователя страница 1

 

Assembly Instructions 

BEFORE YOU BEGIN:

 Thank you for downloading this plan set. The plans contained in this set were 

created after extensive testing and design modifications and have resulted in an R/C airplane that is 
incredibly inexpensive and more fun than should be allowed by law. These plans took an enormous 
amount of time to create and are being offered at no cost so please respect the rights of the designer 
and adhere to the rules and laws regarding copyrighted materials. The information contained in this 
plan set including all diagrams and building photographs is the exclusive property of Full Throttle Jets, 
Inc. By downloading or using these plans, you agree to use them for your personal use only. You may 
share these plans with other modelers for the sole purpose of building the War Wing for personal use. 
Selling or distributing for profit any or all of the information contained in this plan set including kits or 
completed models in any way without the expressed written consent of Full Throttle Jets, Inc. is strictly 
prohibited. 

Please visit the War Wing website 

www.warwingdelta.com

 for updated information, assembly pictures 

and other items of interest. You may also purchase custom made laser cut motor mounts or complete 
assembly kits that include all hardware necessary to complete your War Wing.  

These plans were created with the assumption that the builder has had some experience with building 
R/C aircraft and installing power and control systems. Although we have attempted to be as precise and 
complete as possible, there may be assembly steps that require the builder to make decisions based on 
the power and control options that are installed. It is not recommended that changes in the basic design 
be made. To do so would be the builders’ responsibility. This aircraft as with any R/C aircraft should be 
flown in a safe environment receptive to flying R/C aircraft. Due to the fact that we have no control over 
the construction or flying environment of any model produced from these plans, we will not be held 
liable in any way for any consequences arising from the building or flying of any model produced from 
these plans. Any model produced from these plans is to be considered “Experimental” in nature and 
handled accordingly. By building and/or flying the aircraft described in this plan set you assume 
complete responsibility  for any and all liabilities incurred.      

Содержание Ultimate Combat Delta









Отзывы: