- 12 -
Brake Machinery
’
s burst indicate mark (Fig 16)
(1). Reference marks.
(2). Indicate marks.
Notice :If totally brake. Change the brake block when reference marks and Indicate
marks must be situated a straight line.
- 13 -
Tire
Check the tire pressure regularly and adjust.
Check before the tire cooled
Check if there any metal trash or gravel in the groove of tires
WARNING:
If the tire pressure dose not accord with the standard, it will properly cause the traffic accident.
It is dangerous that use the worn tire, It will have effect to friction between tire and rode. Maybe
make difficult from drive or accident.
Start engine (Fig 18)
Put the key into ignition switch and turn to ON
Electric starter: press start button (1) to start engine, DO not use the
starter more than 5 seconds each time.
NOTICE:
Electric starting is only in the condition of grasping the brake handle.
Electric starting not succeed, if starting again with it, we must stop
for 30 seconds, If still can
’
t start, Please use kick-start.
Engine kick-start :open ignition switch and add gasoline slowly, step
kick-starter pedal down quickly with strength to start engine.
Notice: After using kick-starter pedal, pull it back to original position. Otherwise have effect to
safety ride, and bad to engine.
Had better not open ignition switch when scooter has not use for a long time, and first step kick
starter for some times. Make flue into carburetor and then into cylinder, and open ignition
switch, Start engine, it is easy to start engine like this.
If cold start, warming up engine for 2-3 minutes.
1
Fig.17
