W&T Microwall Gigabit 55210, Руководство пользователя

Страница: 37 / 75

37
W&T
Operation modes and rule configuration
Subject to error and alteration
5�2 Mode Standard router
In standard router mode, the Microwall disconnects the island
network at the
Network 2 port (green) from the corporate
intranet at the Network 1 port (yellow). The island network
becomes an official subnet of the intranet-side infrastructure.
On the intranet side, the path to the island network must be
made known to the participating hosts, usually as a static
route.
If the island network is a marginal network without connecti-
on to further networks, the local IP address of the Mircowall
VPN is configured as default gateway on the island hosts. If
further routers to other networks exist in the island network,
then these paths must be made known to all island hosts as
a static route.
Activate the Standard router operating mode via the menu
tree under Firewall settings -> Operating mode and define the
handling of ICMP echo requests/replies (ping) to the local in-
terfaces and the forwarding of other ICMP datagrams..
The Save button activates the Standard Router mode and the
corresponding rule set is loaded.