38
W&T
IP-Watcher 2x2 Digital PoE
The scan procedure is started by clicking on the
Scan
button.
The progress of a running scan is indicated by a status bar.
Scanning the network range
4.1.3 Editing entries
To edit an entry, select it using the pull-down box and click on
the
Edit
button. This takes you to a screen for modifying the
entry parameters. End the procedure by clicking on the
Apply
button.
4.1.4 Deleting
The entry selected from the pull-down box can be removed
from the
IP Watch List
by clicking on the
Delete
button.
4.1.5 Deleting the IP Watch List
Clicking on the
Delete all
removes all entries from the
IP Watch
List
.
4.2 Configuring alarms
You can use the configuration menu to set parameters for the
available alarms 1 - 4. To do this, open the configuration page
