W&H Osstell ISQ Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 38

W&H Osstell ISQ Скачать руководство пользователя страница 9

9

3. Safety notes

General

> Before using the medical device for the first time, store it at room temperature for 24 hours

> Check the medical device for damage and loose parts every time before use.

> Do not operate the medical device if it is damaged.

> Perform a test measurement with the TestPeg prior to every use.

> The responsibility for the use and timely shutdown of the system lies with the user.

> Ensure that it is possible to complete the operation safely should the units or instruments fail.

> The medical device is not approved for operation in potentially explosive atmospheres.

Do not twist or kink the cable! Do not coil it too tightly!

The medical device is classed as “conventional equipment” (closed equipment without protection against the ingress

of water).

Hygiene and maintenance prior to initial use

> Clean and disinfect the Osstell ISQ module and the measuring probe with cable.

> Sterilize the measuring probe with cable.

«
...
7
8
9
10
11
...
»

Содержание Osstell ISQ







































Отзывы:

Нет отзывов