Lexa PLUS | Instructions for Use | RIS-311 ENG Rev03 | 29/08/2022 | © W&H Sterilization Srl
39
Administrator
DELETE A USER
1
On the homepage, tap
>
>
2
Tap your user name.
3
Enter the PIN and tap
to confirm.
4
Tap
.
5
Tap the user name you want to delete.
6
Tap
to confirm.
RESET A USER PIN
1
On the homepage, tap
> >
2
Tap your user name.
3
Enter the PIN and tap
to confirm.
4
Tap
and the user name for which you want to reset the PIN.
5
Tap
to confirm: the PIN is set to "0000" and a confirmation
message appears.
6
Tap
to return to the homepage.
Note
: Remember the user to change their PIN before reusing the sterilizer.
Traceability options (optional)
FUNCTION AVAILABILITY
To access the user management functions a special code must be
entered. The special code is required only at the first access to the
Options
(
) menus: after the code was entered, the function is
enabled and there is no need to enter the code again.
If you want to disable the function another special code must be
entered.
Note
: for more information contact your dealer.
WHO CAN SET THE TRACEABILITY OPTIONS
Only a user with administrator rights can set the traceability options.
SET THE TRACEABILITY OPTIONS
1
On the homepage, tap
> >
2
Tap your user name.
3
Enter your PIN and tap to confirm.
4
Tap the information to be requested to the users at the
beginning and at the end of the cycle.
5
If you want the user to check the load and release it as valid at
the end of the cycle, tap
.
6
Tap
to confirm and go back to the previous page.
