W&H Lara RIL-117, Инструкция по эксплуатации

Страница: 68 / 138

68 LARA | Instructions for use | RIL-1 ENG Rev04 | 28/02/2019 | © 2019 W&H Sterilization Srl
Sterilization cycles
SET THE REMOTE FOLDER FOR SAVING THE REPORTS (OPTIONAL)
To activate the remote storage and set the necessary parameters
do the following:
1
On the homepage tap > >
>
2
Tap to enable the remote
data storage: the first four fields in
the page and the check box turn
dark grey.
3
In Path enter the name of the
shared folder followed by the sub-
folder name, if any, where to save
reports. Do not enter the full path.
Note: The folder name must include
letters and numbers only. Do not use
other characters like space-bar, slash,
accent, etc.
4
Enter the host name or the IP
address: if the data are complete,
the fields highlight.
5
Not mandatory. Enter the domain
name.
6
Tap to require the
authentication credentials to
access the remote storage folder
and enter the user name and
password.
7
Tap to save.
8
Tap to go back to the previous
page.
9
To check if the parameters entered
are valid, see "Test the data
storage (optional)" on the next
page.