Wanco WI6000, Руководство оператора

Страница: 8 / 28

Page | 6
UNBOXING AND ASSEMBLY
1. WI6000H Chassis- installed
2. Support Bracket- (4)
3. Front Stabilizer (2)
4. Axle Assembly
5. 10” Wheel
6. Wheel Washer (4)
7. Wheel Clip
Assembly:

Install the four support brackets and secure with bolts.

Attach the front stabilizers to the chassis (below the handles)

Attach the axle assembly.

Install one washer on the axle against each welded stop.

Install the two wheels.

Install the two remaining washers and secure with the wheel clips.
The handles are preassembled before packaging. To raise the handles, simply raise the handle
assembly to a horizontal position. To retract the handles, slide the chrome collars toward you to clear
the sleeve and lower them to the starting position.