2 Safety Instructions
Installation Manual WMV-BA-10
Page 7 of 19
EN
2 Safety Instructions
General Information
The construction of the Walther Material Distributor is according to the latest technology and very
reliable. The individual components as well as the complete WMV are continuously checked by our
quality management team.
Basic Safety Instructions
Basic conditions for a safe handling and a failure-free operation of the Walther Material Distributor are:
CAUTION
Hazards from incorrect use
It is the customer’s responsibility that
all relevant safety measures
are followed.
No changes will be made at the device. The customer carries the sole responsibility
for consequences resulting from failure to observe this guideline. Please contact
Walther Systemtechnik GmbH
for any desired modifications.
Make sure that the device is always in a safe operational condition. Checks for
proper function or damages have to be performed by specialists on a regular basis.
Dismounting will only be made by authorized personnel and while using the
operating manual.
Check all lines, hoses and screwed joints regularly for leakages and apparent
damages! Repair damages immediately.
Always make sure that the actual workstation and the WMV are clean and clearly
arranged; and this is routinely checked.
Please observe the guiding rules and regulations for accident prevention and
environmental protection at the workplace.
Dangers from using the Device
The construction of the WMV and its assembly groups is according to the latest technology and is
absolutely reliable. However, there may be dangers for the user or third parties or other physical assets,
if not used correctly.
WARNING
Hazard from incorrect use
Use the device only for the designated purpose and in a safe and operational
condition.
Immediately correct failures which can adversely affect safety and security.
CAUTION
Hazard from residual energy
Please instruct the operating personnel on the respective measures to be taken
against the occurrence of mechanical, hydraulic, pneumatic and electric / electronic
residual energies.