WALTHER PILOT PILOT SIL XXIII, Руководство по эксплуатации, Страница: 12 / 38

Contents
1 General
1.1 Identification of model version
1.2 Normal use
1.3 Improper use
2 Technical description
3 General safety instructions
4 Connection of input lines
5 Operational handling
6 Retooling and repairs
7 Cleaning
8 Trouble shooting
9 Disposal of cleaning and servicing substances
10 Technical data
1 General
1.1 Identification of model version
Models: Manual spray gun PILOT SIL XXII V24233
Manual spray gun PILOT SIL XXIII V24232
Manufacturer: WALTHER Spritz- und Lackiersysteme GmbH
Kärntner Str. 18-30
D-42327 Wuppertal
Phone: 00 49 / 2 02 / 787-0
Telefax: 00 49 / 2 02 / 787-217
www.walther-pilot.de
Email:info@walther-pilot.de
1.2 Normal use
The manual spray guns of the series PILOT SIL XXII / XXIII are designed to be
used exclusively for sprayable media, such as:
• paints and lacquers
• greases, oils and corrosion preventives
• ceramic glazes
• stains
Since all wetted parts are made of stainless specialty steel, the spray guns can
also be used for spraying aqueous materials.
If the material you intend to spray is not included in the above list, please contact
WALTHER Spritz- und Lackiersysteme GmbH, Wuppertal, for further information.
Please note that sprayable materials may only be applied to workpieces and/or
similar objects.
The temperature of the spraying material must not exceed 43 °C.
The term "normal use” also implies that all safety warnings, operating handling
details, etc., as stated in these operating instructions are carefully read, under-
stood and duly complied with.
When using the equipment, the requirements specified in these Operating
Instructions must be observed at all times.
The technical data indicated on the equipment rating plates and the specifications
in the chapter "Technical Data" must be complied with at all times and must not be
exceeded. An overloading of the equipment must be ruled out.
The operator must check and ensure that all technical data and the marking of the
equipment are compliant with the necessary requirements.
The operator must provide corresponding safety measures for all applications in
which the breakdown of the equipment might lead to danger to persons.
If any irregularities are observed while the equipment is in operation, the equip-
ment must be put out of operation immediately and WALTHER PILOT must be
consulted.
Grounding / Equipotential Bonding
Adequate grounding of the spray gun must be ensured.
(
max resistance 10
6
Ω Ω
).
Preferably using a conducting air hose of Walther Pilot
(Item No. V 20 008 30 144)
1
2