WALTCO ZS MK2, Руководство пользователя

Страница: 63 / 68

C=Check R=Replace L=Lubrication * If the lift has the equipment
Comments
OK
Service points Information
See instructions for
resp. lift models
Mecanics (Visual inspection of any cracks and / or damage) IE-0110
C
1.1 Mounting bracket Any cracks / damage, Torques
IE-0105 / IE-0104
C
1.2 Support frame Any cracks / damage, drainage holes IE-0105
C
1.3 Liftarm Any cracks / damage IE-0105
C
1.4 Platform Any cracks / damage IE-0105
C
1.5 Bumper bar Any cracks / damage, Torques IE-0105 / IE-0104
C
1.6 Cylinders Any cracks / damage, gaiters IE-0105
C
1.7 Pivot bolt, bushing (all) Wear and tear, Torques IE-0105 / IE-0104
C
1.8 Slide system*
Any cracks / damage, Torques, and functional
check
IE-0105 / IE-0104
L
1.9 Lubrication All lubrication points IE-0101
C
1.10 Sealings against bodywork* Wear and tear, condition IE-0106
Hydraulics (sequence) of an oil change (Visual inspection of oil leak on the
entire hydraulic system) IE-0109
C
2.1 Main fuse Cleanliness, contact surfaces
IE-0103
R
2.2 Hydraulic oil
NB! Only at XL-Service IF equipped with oil
filter
IE-0102
2.3 Oil filter* Changes at XL-Service. Every three years
C
2.4 Hydraulic hoses Oil leak, wear and tear, free movement IE-0104
C
2.5 The system’s leakproofness Hydr.connection.unit+tank, cyl. torques IE-0104
C
2.6 Pressure Relief Valve
Valve should open when tilting against body,
check pressure if not opening.
IE-0108
C
2.7 Velocity lifting, lowering, tilting That the lifts speed is within the correct range IE-0111
Electrical equipment (check all the points cable and interfaces)
C
3.1 Main power cable, ground cable Wear and tear, attachment, contact surface IE-0103
C
3.2 Control units All functions of all control units IE-0103
C
3.3 Connection box for control units Tightness, cleanliness IE-0103
C
3.4 Circuit card Function, connections, wear and tear IE-0103
C
3.5 Alarm for open platform That the lamp shine when platform is not closed IE-0103
C
3.6 Battery voltage, vehicle and lift
inactive
Difference between the battery and hydraulic
unit (not more than 6% dfference)
IE-0103
C
3.7 Cabin switch* Functional test IE-0103
Signs, stickers (Visual inspection of the function and interpretable)
C
4.1 Warning flags, -tape 2 pcs on platform, platfrom edge IE-0107
C
4.2 Load chart 1 pc on platform, 1 pc outside control unit IE-0107
C
4.3 Working area Sticker on platform IE-0107
C
4.4 Instruction control units Outside control unit IE-0107
C
4.5 Type plate Is firmly attached and is INTERPRETABLE IE-0107
Service Protocol L-Service (annual)
Service control.
(Mark the box for actions performed for each. service point.)
Signature...............................................
Date............................
Company stamp
Service-
points
Comments / Actions
Note: If comment is marked for any of the service points;
complete the task below
Inspection performed: Actions performed:
Signature..............................................
Date............................
Company stamp
Customer: Vehicle:
Reg.No:
Lift model: Prod.No:
73014TL
10 Service record
Year 1
63