55
Decal
6.2
Identification plate
The identification plate is fixed on to the tail
lift’s frame. Affix the corresponding sticker
version of the identification plate, preferably
by the cab door post to facilitate identifica
-
tion.
The identification plate contains the follow
-
ing information:
6.3
Work area
The sticker is positioned clearly visible at the
rear of the vehicle and describes the working
area that must be kept clear for loading and
unloading.
6.4
Warning tape
The warning tape is affixed along the edges
of the platform to make them more conspicu-
ous when the platform is deployed.
Comment
The warning tape location often coincides
with the edge marking and may in this case
have expired.
ft
78995TL
16
Figure 1.
I
dentification plate
7
Explanation of Specification Tag
MODEL NUMBER
RATED CAPACITY
Based on an evenly
distributed load on the
platform flat surface.
SERIAL NUMBER
of liftgate. To be used
when ordering parts or
when contacting Waltco
for service or warranty
questions
DATE OF
MANUFACTURE
Month / Year
GR00241
HDC33
Level Lift
3300 lbs.
HDC 44
Level Lift
4400 lbs.
GR02226
Mount Tube
Usually found
on this end
On some older liftgates
may be located here
LOCATION OF SPECIFICATION TAG
Can be found on driver’s side, end of mount tube.
Model number
Date of manufacture
Month/year
Serial number
of liftgate. To be used
when ordering parts or
when contacting Waltco
for service or warranty
questions
Rated capacity
Based on an evenly
distributed load on the
platform flat surface.