22
WDC200-NX Electronic Water Management.
Revision-2
7.6 System Functions
Hold the
button for 3 seconds to the enter the system functions screen.
Page
Info
Description
Reset
Reset the device as soon as the
device is not busy with any
critical tasks
Factory Default
Config File
Revert the device configuration
settings to their default values
Test Mode
Restart the unit in test mode. In
test mode pressing the inputs
will set their corresponding
outputs
Set Date/Time Set the time and date of the
system
Factory Test
Restart the unit in factory test
mode. This is for use during
production.
Table 9. System functions view
After a minute of inactivity the System Functions screen will close and change to the
Notifications screen.
