Wallenstein WP845 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 72

Wallenstein WP845 Скачать руководство пользователя страница 15

3.2 Safety Sign Explanations

1. Warning!

Falling objects hazard in this area.

Keep feet away from falling split wood.

Always wear steel-toed footwear while
the machine is in operation. Serious
personal injury could result.

2. Warning!

High-pressure injection hazard

Hydraulic fluid is under pressure.
In the event of a leak, turn off the
machine. Do not use your bare hands
to check for leaks. Use a piece of
cardboard, wood, or plastic to locate
the leak. Wear the proper hand and eye
protection when searching for a high-
pressure hydraulic leak.

3. Warning!

Risk of serious injury or death if
the engine is on during service or
maintenance.

Turn off the engine and remove the key
before maintenance or service.

4. Warning!

Risk of explosion.

Charging a frozen battery can cause it
to explode.

Warm the battery to 60 °F (16 °C)
before charging it.

!

0°

5. Warning!

Crush, cut, or sever hazard.

There is a risk of hands being crushed,
cut, or fingers severed in this area.

Keep hands clear of all moving parts.

6. Caution!

Read the Operator's Manual

Read ALL operating instructions and
safety information in the manual. Learn
the meaning of ALL safety signs on the
machine.

The best safety feature is an informed
operator.

Safety Signs

WP845 / WP875
Trailer Firewood Processor

Safety

15

«
...
13
14
15
16
17
...
»

Содержание WP845









































































Отзывы:

Нет отзывов