manualshive.com logo in svg

Wallenstein WP245, Руководство оператора

Поделиться
Скачать
Wallenstein WP245 Скачать руководство пользователя страница 38

6.17 Storage

Placing Wood Processor in Storage

After the season's use or when the machine will not be used 
for a period of time, place the machine in storage. Completely 
inspect all major systems of the Wood Processor. Replace 
or repair any worn or damaged components to prevent any 
unnecessary down time at the beginning of the next season.

1. 

Remove all wood from the machine.

2. 

Thoroughly clean the machine to remove all dirt, mud, or 
debris.

3. 

Inspect all moving parts. Remove any entangled material.

4. 

Check the condition of winch rope. Replace or adjust as 
required.

5. 

It is best to store the machine inside. If that is not possible, 
cover with a waterproof tarp.

Removing from Storage

When removing this machine from storage, the Pre-operation 
Checks on page 25.

01297

Fig.  47 – Storage Position

Operating Instructions

WP245 / WP275

3-Point Hitch Firewood Processor

38

Содержание WP245





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды