Wallenstein WP240, Руководство оператора

Страница: 26 / 60

4. Controls
Before starting to work, all operators should familiarize
themselves with the location and function of controls.
4.1 Hydraulic Controls and Auto
Cycle
These two hydraulic levers
control the extending and
retracting movement of the splitting cylinder.
These
two levers control the flow of oil to the cylinder. They
are equipped with a detent in the engaged position to
allow the cylinder to move through its complete cycle
and then return to its starting position automatically.
Lever 1
Controls the first half of the Auto Cycle.
• Push the lever down into the detent to extend the
cylinder.
• When the cylinder is extended, the lever kicks out
of the detent to neutral.
Lever 2
Controls the second half of the Auto Cycle.
• Push down into detent and the cylinder retracts
automatically.
• When the cylinder is fully retracted, the lever kicks
out of the detent to neutral.
Auto Cycle
Push both levers down into the
detent positions to initiate the
splitting Auto Cycle.
• The cylinder extends to split
the log. When it reaches full
extension, Lever 1 kicks out
of the detent to neutral. The
cylinder then begins to retract.
• When the cylinder is fully
retracted, Lever 2 kicks out of
the detent to neutral and the
cycle stops.
Lever 1 can be used to manually
retract the cylinder:
1.
Pull the lever up and the ram
will begin to retract.
2. Release the lever and it will
return to neutral and the
cylinder will stop.
NOTE:
Lever 2 does not have a function in the
upper position.
Fig. 5 – Hydraulic Controls
Lever 1 Lever 2
Controls
WP240-WP270
3-Point Hitch Firewood Processor
26