Wallenstein P3 PULSE WP1624, Руководство оператора

Страница: 13 / 88

Safety
WP1624 Series
Firewood Processor
Safety
13
• DO NOT run engine with air cleaner or air cleaner cover
removed. Engine damage can result.
Be sure to:
• Remove the wire from the spark plug when servicing
the engine or equipment to prevent accidental starting.
Disconnect the negative wire from the battery terminal.
• Keep cylinder fins and governor parts free of grass and
other debris which can affect engine speed.
• Examine muffler periodically to be sure it is functioning
effectively. A worn or leaking muffler should be repaired or
replaced, as necessary.
• Use fresh gasoline. Old fuel can gum carburetor and cause
poor performance.
• Check fuel lines and fittings frequently for cracks or leaks.
Replace if necessary.
2.6.8 Welding Safety
• If welding repairs are required, have them performed by
a trained welder with proper service instructions. Know
the material to be welded and select the correct welding
procedure and materials (electrodes, rods, wire) that
provide a weld metal strength equivalent to the parent
material.
• Work with extra care when welding, grinding or torch
cutting near flammable objects.
• Welding on painted surfaces releases dangerous fumes
and results in a poor weld joint that can result in failure and
potential accidents. Always remove paint from areas to be
welded.
• Heated paint gives of poisonous gases. Therefore, paint
must be removed from an area with a radius of at least
4" (10 cm) before carrying out welding, grinding or gas
cutting. In addition to the health hazard, the weld is of
inferior quality and strength if the paint is not removed.
Methods and precautionary measures when removing paint:
Blasting—use respiratory protective equipment and protective
goggles.
Paint remover or other chemicals—use a portable air extractor,
respiratory protective equipment, and protective gloves.
Grinding—use a portable air extractor, respiratory protective
equipment and protective gloves and goggles.