2.13 Grapple Boom Safety
Operator Safe Area
In certain cases where the boom is fully retracted and handling
an 8 ft (2.4 m) log, it is possible to create a collision hazard with
the operator at the control station. Follow these important points
to keep operators and workers safe from potential hazards.
•
Create a 90° operator safety zone based on the position
of your work station, and material stack. Never move the
grapple or material into the operator safe zone.
•
Always move the work station opposite the work area. If
work area is on the left of the trailer, position the control
station on the right of the trailer.
•
Always be aware of the position of the boom and material
being handled.
•
Always be aware of overhead hazards, modify your work
zone to take these hazards into account:
-
Telephone lines
-
Tree branches
-
Roof overhang
-
Wash lines, ropes or cables
-
Power lines – stay a minimum 20 ft (6 m) away.
•
A Safe Area must be designated for workers on foot near
this equipment.
•
The boundaries of a designated Safe Area must be
communicated to all workers within and near the Work
Zone.
Work Zone Arrangement
Injury may occur from heavy material falling / dropping or
material on a rotating boom creates a collision hazard if workers
or bystanders are inside the working zone. Follow these
important points to keep workers and bystanders safe from
potential hazards:
•
A
Work Zone
includes any area where work with this
grapple is done and can include the traveled portion of a
road if being used as a landing.
•
Create a 20 ft (6 m) radius work zone perimeter, clearly
marked with safety cones.
•
Workers and bystanders should never approach the grapple
while in operation without first signaling the operator.
•
Work being done in a Work Zone in a forestry operation
must be planned and the work area must be located,
constructed, maintained, and operated to ensure that:
-
Logs can be moved safely in the area
-
Log piles and equipment used to handle the logs do not
become unstable or otherwise create a hazard
-
Workers can work in locations clear of moving logs and
equipment
-
Workers are not exposed to incoming or runaway logs
or other debris
-
The area is kept free from buildup of bark and other
debris to the extent that it would pose a risk to workers
-
An effective method of dust control is used and
maintained
•
Log piles must, to the extent practicable, be located on
stable and relatively level ground.
•
Log piles must not be higher than the safe operating reach
of the excavator being used to handle the logs.
Safety
LXT95 / LXT115
Log Trailer & Grapple
Safety
12
Содержание LXT115
Страница 64: ...www wallensteinequipment com ...
