Push the switch up to
activate the grapple
Rotate
function.
6.6.2 LXG430RP Controls
01422
Fig. 20 –
LXG430RP Hydraulic Control Selector
The hydraulic control selector box provides a way of controlling
all four grapple functions from a single hydraulic control in the
skid steer cab. The position of the switches determines which
function is active at the hydraulic control valve.
Activate a switch to perform a specific grapple function.
CAUTION!
Avoid the risk of injury from unexpected grapple
movement. Activate one control switch at a time.
Grapple functions can perform unexpectedly if
more than one switch is activated.
W085
Push all switches down
to activate the grapple
Open / Close
function.
Push the left-hand switch
up to activate the grapple
Rotate
function.
Leave the other two
switches down.
Push the middle switch
up to activate the
Boom Extender
function.
Leave the other two
switches down.
Push the right-hand
switch up to activate the
Winch
.
Leave the other two
switches down.
LXG400 Series
Log Grapples
Controls
29
Содержание LXG400 Series
Страница 1: ...OPERATOR S MANUAL Skid Steer Log Grapple LXG400 Series Document Number Z97107_En Rev Mar 2021 ...
Страница 51: ......
Страница 52: ...www wallensteinequipment com ...