Wallenstein LXG300 Series Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 52

Wallenstein LXG300 Series Скачать руководство пользователя страница 27

LXG300 Series
Grapples

Controls

27

6.7 LXG330RP Controls

(LXG330RP models)

6.7.1 Hydraulic Control Selector

01422

Fig. 18 –

LXG330RP Hydraulic Control Selector

The hydraulic control selector box needs to be mounted in a
convenient location inside the cab of the tractor, so that the
grapple can be easily and safely controlled.

The control requires a 12-volt source and can be connected
through the 12 V adaptor plug into a standard cigar lighter
receptacle. For convenience, the plug comes with a 72"
(182 cm) lead. When mounting the control, make sure the cable
is routed to avoid:

• The operator getting entangled when exiting or entering

the cab

• Being hit or pinched by the machine or material

The main harness features a connector that allows the controller
to be detached from the grapple, allowing the controller to
remain in the cab when the grapple has been removed and
stored.

The hydraulic control selector box provides a way of controlling
all four grapple functions from a single hydraulic control in the
tractor cab. The position of the switches determines which
function is active at the hydraulic control valve.

Activate a switch to perform a specific grapple function.

CAUTION!

Avoid the risk of injury from unexpected grapple

movement. Activate one control switch at a time.

Grapple functions can perform unexpectedly if

more than one switch is activated.

W085

Push the right-hand
switch up to activate the

Winch

.

Leave the other two
switches down.

Push the middle switch
up to activate the

Boom Extender

function.

Leave the other two
switches down.

Push the left-hand switch
up to activate the grapple

Rotate

function.

Leave the other two
switches down.

Push all switches down
to activate the grapple

Open / Close

function.

«
...
25
26
27
28
29
...
»

Содержание LXG300 Series





















































Отзывы:

Нет отзывов