Wallenstein LXG300 Series Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 52

Wallenstein LXG300 Series Скачать руководство пользователя страница 16

Safety Signs

LXG300 Series

Grapples

Safety

16

3.2 Safety Sign Explanations

1. Caution!

Be aware of pinch hazards from moving
parts such as boom, grapple, and logs.

2. Caution!

Risk of machine moving unexpectedly
causing injury when servicing or
repairing. Shut down machine before
performing maintenance procedures.
Remove the ignition key.

3. Caution!

Refer to the operator's manual. Read ALL
operating instructions in the manual and
learn the meaning of ALL safety signs on
the machine.

The best safety feature is an informed
operator.

4. Warning!

Always wear appropriate Personal
Protective Equipment when using this
machine. For example:

• A hard hat
• Heavy gloves
• Hearing protection
• Protective shoes with slip

resistant soles

• Protective glasses, goggles or

face shield

5. Warning!

Risk of falling debris from grapple. Do
not lift any load that cannot be safely
secured by the grapple. Never allow
anyone to walk under overhead load. Keep
bystanders at a safe distance.

6. Caution!

Hydraulic fluid under pressure. In the
event of a leak, shut machine down. Do
not check for leaks with bare hands. Wear
proper hand and eye protection when
searching for a high-pressure hydraulic
leak.

«
...
14
15
16
17
18
...
»

Содержание LXG300 Series





















































Отзывы:

Нет отзывов