Wallenstein BXT72S, Руководство оператора

Страница: 3 / 76

1. Introduction
WARNING!
Do not start or operate the machine before
you read this manual. Make sure that you
fully understand all the safety, operation, and
maintenance information before you operate the
machine.
Keep this manual with the machine at all times
and available for frequent reference.
W034
Congratulations on your choice of a Wallenstein BXT72S
wood chipper!
BXT-S Series wood chippers are high-quality, rugged machines
that are designed to cut brush and branches into consistent size
wood chips. Each wood chipper is powered by a gas engine
with centrifugal clutch that transfers power to the rotor through
drive belt. The rotor knives cut the wood material into wood
chips that are blown out the adjustable discharge chute.
For safety, efficiency, and trouble-free operation of this
Wallenstein product, anyone who uses or maintains the
machine must read and understand the safety, operation,
and maintenance information in this manual and the engine
manufacturer's manual.
For information about the accessories, go to
WallensteinEquipment.com .
Keep this manual available for frequent reference and to give to
new operators or owners. Call your local Wallenstein dealer or
the distributor if you need assistance, information, or additional
copies of the manuals.
Units of measurement in Wallenstein technical manuals are
written as: US Customary (SI metric).
For support or service, contact your local Wallenstein Equipment
dealer or distributor.
Wallenstein Equipment Inc. • © 2023. All rights reserved.
No part of this work may be copied, reproduced, replaced,
distributed, published, displayed, modified, or transferred in
any form or by any means except with the prior permission of
Wallenstein Equipment Inc.
This manual is subject to change without notice. For the most
current information, go to
WallensteinEquipment.com .
BXT72S
Wood Chipper
Introduction
3