BXC34 / BXC34 Bundle
Wood Chipper
Operating Instructions
29
6.10 Mulch Collector Bag
A mulch collector bag can be attached to the discharge chute.
If you purchased a BXC34 Bundle, the mulch collector bag is
included with your machine. To purchase a mulch collector bag
separately, contact your local Wallenstein Equipment dealer or
distributor.
The mulch bag holds 2.7 ft
³
(28 L) of material and is made of
a mildew-resistant, synthetic material. The porous fabric allows
air from the rotor to pass through it without restricting collection
of the wood chips.
6.10.1 Install a Mulch Collector Bag
1.
Rotate the hood deflector to the horizontal position.
For instructions, see
2.
Place the open end of the mulch collector bag over the
hood deflector and the end of the discharge chute.
3.
Tighten the strap on the bag around the discharge chute to
secure it.
4.
Make sure that the zipper on the bottom of the bag is
closed.
6.10.2 Remove a Mulch Collector Bag
When the mulch collector bag is full or you are finished chipping
wood:
1.
Loosen the mulch collector bag strap.
2.
Carefully, slide the mulch collector bag off of the discharge
chute and over the deflector hood.
3.
To empty the mulch collector bag, unzip the bottom of the
bag.
00229
Fig. 17 –
Empty the mulch collector bag
6.11 Jockey Wheel
A jockey wheel can be installed on the front of the machine.
If you purchased a BXC34 Bundle, the jockey wheel is included
with your machine. To purchase a jockey wheel separately,
contact your local Wallenstein Equipment dealer or distributor.
A jockey wheel makes the machine easier to move. The
jockey-wheel handle can be attached to a clevis hitch to tow the
machine behind a small lawn tractor. For movement and towing
instructions, see
.
02013
Fig. 18 –
Jockey wheel
