BXC34 / BXC34 Bundle
Wood Chipper
Operating Instructions
27
6.5 Start the Machine
WARNING!
Fast retraction of the starter cord (called
kickback) pulls your hand and arm toward the
engine faster than you can let go of the handle.
Serious bodily harm (for example; bruises,
sprains, fractures, and broken bones) can result.
When starting the engine, pull the starter cord
slowly until you feel resistance, and then pull it
rapidly to avoid kickback.
W102
WARNING!
Before you start the machine, read and
understand all of the safety information in this
manual and the engine manufacturer's manual.
IMPORTANT! If the engine does not start after
repeated attempts, contact your local dealer or go to
Before you start the machine, see the information under
.
1.
Complete the tasks described in the
2.
Make sure that the machine is level and in a stable position.
3.
Move the choke control to the
Open
position.
4.
Move the throttle control to the
Fast
position.
5.
Firmly grip the starter-cord handle.
6.
Pull the starter cord out slowly until you feel resistance,
then pull rapidly.
7.
As the engine warms up, move the choke control to the
Closed
position.
8.
Slowly, move the
clutch handle
to the
rotate
position.
6.6 Stop the Machine
IMPORTANT! Do not choke the carburetor to stop the
engine.
1.
Stop placing material into the feed hopper.
2.
Wait for the machine to process the material that is in the
feed hopper.
3.
Move the
clutch handle
to the
STOP
position.
4.
Move the
throttle control
to the
STOP
position to turn off
the engine and close the fuel shut-off valve.
5.
Wait 10 seconds for the drive belt and rotor to stop.
6.7 Emergency Stop
In the event of an emergency:
1.
Move the
clutch handle
to the
STOP
position.
2.
Move the throttle control to the
STOP
position to turn off the
engine and close the fuel shut-off valve.
3.
Wait 10 seconds for the drive belt and rotor to stop.
4.
Remove the cause of the emergency before starting the
engine and resuming work.
