Wallenstein BX52RI, Руководство оператора

Страница: 41 / 72

BX52R, BX72R, BX102R
3 PH Roller-feed Chipper
Operating Instructions
41
6. Operating Instructions
WARNING!
Risk of serious injury or death. Keep hands, feet
and clothing away from feed rollers when the
chipper is operating. Do not climb onto the feed
table or hopper.
W023
WARNING!
Never reach into the feed hopper. Doing so risks
hands getting caught. Use a stick or branch to
push in any material that does not move on its
own.
If jammed, stop the engine, wait for the rotor to
stop, then clear the jam.
W004
CAUTION!
Hearing loss hazard. Prolonged
exposure to loud noise may cause
permanent hearing loss. Use suitable
protection while operating the
machine.
W016
The operator has the responsibility of being familiar with and
following all operating and safety procedures.
Although this machine is easy to use, each operator should
review this section to get familiar with the detailed safety and
operating procedures.
6.1 Safety Rules
• Do not reach into rotor or feed hopper openings when
the machine is running. Install and secure access covers
before starting engine.
• Do not move or transport chipper when the rotor is
turning.
• Keep hydraulic lines and fittings tight, in good condition
and free of leaks.
• Keep the working area clean and free of debris to prevent
tripping. Operate only on level ground.
• Do not point discharge at people, animals or buildings.
Rotor can expel wood chips fast enough to cause injury.
• Be aware of the size and shape of the material. Crotchety
branches and logs can move in unpredictable ways
as they pass through the feed rollers and could cause
injuries. Large curved pieces should be cut to smaller
straighter sections.
• Do not work alone, it is safer to work in pairs in case an
emergency arises.
• Never stand, sit or climb onto any part of the chipper
while it is running.
• Place chipper is a Safe Condition before servicing,
adjusting, repairing or unplugging.
• Always use the rotor lock to immobilize the rotor when
attempting to clear a clog or changing chipper blades.
See page 30.
• Do not run machine inside a closed building to prevent
asphyxiation from engine exhaust.
• Use care when feeding material into chipper. Do not
send metal, bottles, cans, rocks, glass or other foreign
material into wood chipper. If foreign material enters
chipper, inspect machine for damaged or loose parts
before resuming work.
CAUTION!
Do not risk injury by working in an unsafe
situation. Take steps to make the machine safe to
work on before performing any maintenance or
service procedure.
Follow steps listed to put the machine in a Safe
Condition.
W049
Safe Condition
-
Ensure chipper is resting on the ground.
-
Disengage PTO.
-
Set parking brake and shut off tractor engine. Remove
ignition key.
-
Ensure all components have stopped moving.
-
Block and chock tractor wheels.
-
Set rotor lock if required.
IMPORTANT! Do not put metal objects, bottles, cans, rocks,
glass or other foreign material into wood chipper. If such
items happen to get into the chipper, stop machine and turn
engine off. Wait for all moving parts to stop before removing
material. Inspect machine for damaged or loose parts
before resuming work.