BX52R, BX72R, BX102R
Tractor Wood Chipper
Operating Instructions
47
Adjustable Ski Height (BX52R only)
The BX52R ski can be adjusted up to 6" (15 cm) if required,
to help align the PTO shaft when attaching the chipper to the
tractor. The PTO shaft should be as level as possible when the
chipper is in the lowered (working) position.
00838
Fig. 56 –
BX52R Adjustable Ski Height
1.
Raise the chipper up. Loosen the nuts on the four plow
bolts on the ski base.
2.
Adjust the ski to the best position for the PTO connection.
Re-tighten the nuts.
7.4 Chipping Operation
Chipper Capacity
Model Series
Material Size
BX52R
5" (13 cm)
BX72R
7" (18 cm)
BX102R
10" (25 cm)
1.
Engage the PTO. Set tractor at half throttle. Make sure the
rotor is up to speed before beginning.
2.
Move the control bar out of the STOP position. Lift up the
detent reset lever to release it.
00816
Fig. 57 –
Detent Reset Lever
Feed rollers function in Reverse even at engine idle
so material can be backed out.
3.
Push the control bar forward to the first detent position to
start the forward feed. The control bar stays in this position
until moved.
