background image

WXR720/L, WXR740/L
Trailer Wood Splitter

 Safety

Safety

9

2.5  Equipment Safety Guidelines

Always place the machine in a 

Safe Condition

 before 

performing any service work, maintenance procedures, or 
storage preparation.

 SAFE CONDITION

• 

Shut off engine.

• 

Make sure all moving parts have stopped.

• 

Disconnect battery ground (-) cable.

• 

Block or chock wheels.

• 

When two or more workers are present, only one worker 
should be designated as the machine operator and loader.

 

A potentially dangerous condition arises when the worker 
loading the machine does not control the hydraulic ram. 

A worker's hand may be pinched or crushed if the ram has 
been activated during loading.

• 

Never use equipment with safety shields removed. Keep all 
shields in place. If shield removal becomes necessary for 
repairs, reinstall the shield prior to use. 

• 

Replace any safety sign or instruction sign that is not 
readable or is missing. Location of safety signs is indicated 
in this manual.

• 

Do not allow anyone other than a responsible, properly 
trained and physically able person to operate this machine. 
This equipment is dangerous to children and persons 
unfamiliar with its operation. 

• 

Do not modify the equipment in any way. Unauthorized 
modification may result in serious injury or death and may 
impair the function and life of the equipment.

 

• 

Never exceed the limits of the machine. If its ability to do 
the job or to do it safely is in question— 

STOP IMMEDIATELY!

2.6  Safety Training

• 

The best safety feature is an 
informed, careful operator—we ask 
you be that kind of operator. It is 
the operator's responsibility to read, 
understand and follow ALL safety 
and operation instructions in the 
manual. 

• 

Train all new personnel and review instruc tions frequently 
with existing workers. Only properly trained and physically 
able operators should use this equipment. 

A person who 

has not read and understood all operation and safety 
instructions is not qualified to use the machine.

 Untrained 

operators expose themselves and bystanders to possible 
serious injury or death. If elderly people are assisting with 
the work, their physical limitations need to be recognized 
and accommodated.

• 

Learn the controls and how to stop the machine quickly in 
an emergency. 

• 

If this machine is loaned or rented, it is the machine 
owner's responsibility to make certain that every operator:

  

-

Reads and understands the owner's manual

  

-

Is instructed in safe and proper use of the equipment

  

-

Understands and knows how to perform the Safe 
Condition procedure

2.7  Transport Safety

• 

Comply with local laws governing safety and transporting 
of machinery on public roads.

• 

Do not exceed 50 mph (80 km/h) when towing this 
machine. Slow down for rough terrain and cornering.

• 

Do not transport or move the wood splitter with the engine 
running.

• 

Be sure the trailer is hitched correctly to the towing vehicle 
and a retainer is used through the hitch mechanism. 

• 

Always attach safety chains between the hitch and the 
towing vehicle. Cross the chains underneath the trailer 
tongue.

• 

Check wheel lugs and tighten if required. Inspect rims for 
damage. 

• 

Inspect tires for cuts or damage. Check tire pressure and 
adjust if required.

• 

Ensure the stability jacks are raised and secured with the 
latch pin.

• 

Make sure tow vehicle is fitted with the correct size (2 in) 
towing ball. 

• 

Make sure fuel and hydraulic tank caps are on tight to 
prevent spills while transporting.

• 

Clean all debris off the splitter. Remove any tools or other 
loose items.

• 

Check that all the lights, reflectors and other lighting 
requirements are installed and in good working condition.

• 

Never allow riders on the machine. 

• 

Be a safe and courteous driver. Always yield to oncoming 
traffic in all situations, including narrow bridges, 
intersections, and so on. 

• 

Watch for other traffic when near or crossing roadways.

• 

Do not drink and drive.

• 

Before transporting, perform a walk-around inspection to 
ensure everything is safe.

Содержание 720124













































Отзывы: