Wallenstein 2E9US111XNS091454, Руководство оператора

Страница: 25 / 72

BXTR6438
Trailer Wood Chipper
Controls
25
4.5 P3 PULSE Electronic Control System
Software version 3.0.0
4.5.1 Overview
IMPORTANT! The controller and indicator panel or display
are not serviceable. In the event of a failure, return them to
your local Wallenstein Equipment dealer or distributor.
The Wallenstein P3 PULSE Electronic Control System optimizes
the capacity of the wood chipper.
The P3 PULSE consists of an electronic controller and indicator
panel. A rugged, user-friendly 4.3" (109 mm) display is available
as an option and replaces the indicator panel.
The P3 PULSE tracks the rotor hours-of-operation and keeps the
wood chipper working in the peak operating range by matching
the feed rate with the rotor speed. As material is put into the
chipper, a sensor on the rotor sheave continually monitors rotor
rpm. If the rotor slows down under load, the P3 PULSE slows
the feed roller speed, which allows the rotor to recover. If the
rotor slows to below the minimum rotor speed setting, the P3
PULSE auto-reverses the feed rollers to pull material away from
the rotor. When the rotor speed returns to the operating rpm, the
P3 PULSE returns the feed rollers to forward motion to resume
feeding material into the wood chipper. In the unlikely event the
rotor becomes jammed with material, the P3 PULSE quickly
stops the engine to prevent clutch burn out.
Indicator Panel Features
The indicator panel has LED lights that communicate the
following:
• The machine status (ready to operate, rotor jam, or upper
rotor housing open).
• The feed-roller status (forward, neutral, or reverse).
Display Option Features
The display provides a method for operators to:
• See the feed-roller position, rotor speed, and total machine
operating hours.
• Adjust feed settings to customize the chip size when
chipping any type of material.
• See the diagnostic operating parameters.
Parameter setup depends on the machine model.
• Use the four soft-key navigation buttons to navigate through
the screens.
Soft-key navigation buttons are located below the display
screen. Icons on each screen indicate the soft-key
functions.
02015
F
N
R