Wallenstein 2E9US1116AS040088, Руководство оператора

Страница: 2 / 46

2
BXT Series
1. Foreword
1.1 Introduction
Congratulations on your choice of a Wallenstein Trailer
Self-feed Chipper!
The BXT Chippers are strong, rugged machines that can provide
consistent chipping of materials. These chippers have a gas
engine with a centrifugal clutch that transmits power through a
V-belt drive to power the rotor. The rotor blades turn the wood
into chips as the blades pass a stationary blade. A twig breaker
helps to generate wood chips as the rotor turns past it.
This manual covers the following Wallenstein models:
BXT4224 Honda® GX690, 22 hp (16.5 kW)
BXT6238 Kohler® CH980, 35 hp (26.1 kW)
Safe, efficient and trouble-free operation of this Wallenstein
product requires anyone that uses the machine reads and
understands the Safety, Operation, Maintenance information
contained within the Operator's Manual.
Keep this manual handy for frequent reference and to pass on
to new operators or owners. Call your Wallenstein dealer or
the Distributor if you need assistance, information or additional
copies of the manuals.
Units of measurement in Wallenstein Equipment technical
manuals are written as:
US Customary (SI metric)
WARNING!
Do not attempt to start or operate the machine
without thoroughly reviewing this manual for
safe and proper operation.
Always keep this manual with the machine.
W034
Wallenstein Equipment Inc. • © 2020. All rights reserved.
No part of this work may be copied, reproduced, replaced,
distributed, published, displayed, modified, or transferred in
any form or by any means except with the prior permission of
Wallenstein Equipment Inc.
www.wallensteinequipment.com
Model Configuration
BXT4224
Series Chipper
Capacity
(inches) Design
Iteration Engine
Horsepower