Wallace Perimeter Security SPEEDGATE, Руководство по установке и обслуживанию

Страница: 21 / 142

SPEEDGATE Installation and Maintenance Manual Revision 1 - MAY 2023
21
APPLICATION: IDENTIFYING GATE SYSTEM CATEGORY AND USAGE CLASS
Application: Identifying Gate System Category and Usage Class
The SpeedGate has been designed for use in allowing selective access for security purposes for
motorcycles, passenger vehicles and larger transport vehicles.
This System is applicable to a Class I, Class II, Class III or Class IV Gate System, and may only be installed at
locations meeting the UL 325 definitions.
The SpeedGate gate system, according to UL 325 Safety Standards, falls in the Swing Gate and Slide Gate
categories for gate systems. Its usage class is determined by the area that the vehicular gate services. Four
different vehicular usage classes are defined by UL 325:
Class IV: RESTRICTED ACCESS VEHICULAR
GATE OPERATOR
Intended for use in guarded industrial locations
or buildings such as an airport security area or
other restricted access location, not servicing
the general public, in which access is monitored
by security personnel or via closed circuitry.
Class II: COMMERCIAL / GENERAL ACCESS
VEHICULAR GATE OPERATOR
Intended for use in a commercial location or
building such as multi-family housing units (five
or more single family units), hotels, garages,
retail stores or other buildings servicing the
general public.
Class I: RESIDENTIAL VEHICULAR GATE
OPERATOR
Intended for use in a location of one to four
single family dwellings or a parking area
associated with one to four single family
dwellings.
Class III: INDUSTRIAL / LIMITED ACCESS
VEHICULAR GATE OPERATOR
Intended for use in an industrial location or
building such as factories or loading docks or
other locations not intended to service the
general public.