Wallace Perimeter Security ALPHA, Руководство по установке и обслуживанию

Страница: 176 / 182

176
wallaceperimetersecurity.com
Phone: 866.300.1110
DC BATTERY REPLACEMENT
DC Battery Replacement
Wallace Perimeter Security provides a one-year warranty from the date of shipment for all the batteries
supplied with the Kinetic operator.
Indicators of a low battery include:
• LOW BATTERY or DEAD BATTERY appears on the SmartDC Controller display which may or may not
be indicative of normal discharge.
• Alert 18 CHANGE BATTERY appears on the SmartDC Controller display. The operator emits an
audible chirp every minute to indicate a problem exists.
• AP (#) AC LOSS appears on the SmartDC Controller display. Gate operation is affected by AC power
loss depending on customer preferences and the configuration set by the installer in the AP (#) AC
LOSS User Menu.
For detailed information about the
AP AC LOSS configuration, refer
to “Setting AC Power Loss Gate
Function” on page 92 .
Symptoms of a low battery may include:
• Gate remains locked in the open position.
• Gate remains locked in the closed position.
• Gate opens five seconds after AC power loss and locks open.
Before replacing the batteries, turn
off all power switches. Use only
AGM batteries as Replacements 8Ah
- MX002008, 50Ah - MX002013).
The batteries supplied in the Kinetic
operator are state-of-the-art AGM
batteries. Do NOT use flooded cell
batteries as damage may occur to
the unit. Wear protective clothing
while working with batteries.