Walker's PATRIOT, Инструкция по эксплуатации

Страница: 8 / 16

Page 8
Device Function
Power On Device: Press and hold power button for 2 seconds.
Raptor will play an audible “Walker’s” cound clip to indicate the
unit has powered on.
Ambient Volume Adjust: Volume changes respectively when
pressing the Ambient Volume Up or Down controls:
• Volume Up increases volume by one stage.
• Volume Down decreases volume by one stage.
NOTE :
When Ambient volume reaches minimum there will be a double
beep.
When Ambient volume reaches maximum there will be a
double beep.
Charging the device:
Open the Micro USB Connector cover, plug in a Micro USB cable,
then plug the other end into a USB power source or adapter. While
the device is charging the LED will remain constant red . When fully
charged the device’s LED will turn blue .
Note: To pair the Raptor to a new device, press and hold the power button
from an off state for 7 seconds. This forgets the previously paired device.
Raptor will confirm by stating audibly “Pairing” and the LED with flash red
and blue.